Skip to content
Close
SEARCH
CONTACT
PHONE HOTLINE: 800-346-4296 E-MAIL: sales@hayn.com
Contact Us
PHONE HOTLINE: 800-346-4296 E-MAIL: sales@hayn.com
Contact Us
Hayn Product Header (2240 x 660 px) (7)

Trellis Posts

Hayn Trellis Posts are stainless steel standoff posts that hold Green Wall trellis wire off a wall or structural surface, available in single-hole and two-hole configurations across two cable offset distances and two wire size ranges for 1/8" through 1/4" wire. 

Strong Where It Matters

Trellis Posts

The cable-to-surface offset dimension is the key specification here — the LP63 series holds wire at a 2" offset and the LP64 and LP104 series at a 3" offset, with the offset distance determining how far the trellis grid stands away from the wall behind it. Single-hole versions (suffix -2) mount with one screw for lighter-duty or decorative applications; two-hole versions (suffix -4) provide a more secure mount for installations under greater cable tension or structural load. The LP63 and LP64 series cover 1/8" wire with a 1" base diameter, while the LP104 ASSY series accommodates 3/16" through 1/4" wire with a 1-1/4" base diameter. All mount with a 3/8" screw and are compatible with the Hayn LP6-BASE Wide Support Base and the Threaded Stud and Hex Nut System. 
Request specifications
trellis_post

Trellis Posts

Part # Compatible Wire Size Cable / Surface Offset Base Dia. # Holes Mount Screw Size
LP63-2 1/8″ 2.0″ 1″ 1 3/8″
LP64-2 1/8″ 3.0″ 1″ 1 3/8″
LP63-4 1/8″ 2.0″ 1″ 2 3/8″
LP64-4 1/8″ 3.0″ 1″ 2 3/8″
LP104-2ASSY 3/16″ – 1/4″ 3.0″ 1-1/4″ 1 3/8″
LP104-4ASSY 3/16″ – 1/4″ 3.0″ 1-1/4″ 2 3/8″

Note: Can be used in conjunction with Threaded Stud / Hex Nut System.

Engineered In America Every Hayn fitting is designed and manufactured at our facility in Rocky Hill, Connecticut — the same American workmanship that has set the standard for stainless steel rigging hardware since 1950.
Cold-Worked Production Hayn fittings are cold-worked, not cast. That distinction matters: the cold-working process refines grain structure, increases fatigue resistance, and produces a fundamentally stronger component — one built to perform when the load comes on it.
Precision Manufacturing Our Rocky Hill production floor runs CNC vertical mills, CNC lathes, large-capacity mill-turn centers, and waterjet cutting systems — all configured to produce hardware that meets exact specifications, every time.
75+ Years of Excellence Hayn has been engineering and manufacturing marine and architectural rigging hardware since 1950. That track record isn't just history, it's the design knowledge, failure data, and continuous improvement that goes into every product we make. 
  • Type 316 stainless steel construction for superior saltwater corrosion resistance
  • Manufactured in Rocky Hill, Connecticut to Hayn's proprietary tolerances
  • Precision-machined using advanced CNC manufacturing equipment



  • Engineered for seamless integration in marine and architectural rigging systems

  • Short lead times on both standard and custom components

  • Backed by 75 years of marine and architectural hardware expertise

Hayn Product Header (2)

Let's Build Something Together

 Hayn has been engineering precision rigging hardware since 1950. So whatever your project demands, you're building with hardware that's been proven at sea and on structure for generations. 
Request Technical Specifications