Skip to content
Close
SEARCH
CONTACT
PHONE HOTLINE: 800-346-4296 E-MAIL: sales@hayn.com
Contact Us
PHONE HOTLINE: 800-346-4296 E-MAIL: sales@hayn.com
Contact Us
Hayn Product Header (2240 x 660 px) (7)

Threaded Stud

The Hayn Threaded Stud is the most economical cable attachment and tensioning system in the Traditional Cable Rail lineup, using a flat washer and hex nut to tension the cable against the end post, available in machine swage, Hayn Grip, and Handy Crimp configurations across wire sizes from 1/8" through 3/8" with thread lengths scaled to run lengths from 0 to 75 feet.

Strong Where It Matters

Threaded Stud

Four thread length options — end (no adjustment), short (1" adjustment/20' run), standard (1-3/4" adjustment/50' run), and long (3" adjustment/75' run) — allow the correct stud to be specified for the actual run length rather than defaulting to maximum adjustment on every installation. The system completes with a Cap (Acorn) Nut threaded onto the protruding stud end, which locks the tensioning hex nut in position and finishes the installation cleanly. Thread sizes from 1/4-28 through 1/2-20 cover wire diameters from 1/8" through 3/8", and versions with a wrench flat are available by contacting Hayn directly. 
Request specifications
threaded_stud_system-e1688147629143

Machine Swage – Factory Assembled to Field Dimensions

Part # Wire Size Thread Size T-Thread Length Adjustment Range Max. Run Length
14LLE18RH 1/8″ 1/4-28 7/16″ 0″ 0′
14LLP18RH 1/8″ 1/4-28 1-1/2″ 1″ 20′
14LL18RH 1/8″ 1/4-28 2-1/4″ 1-3/4″ 50′
14ASLL18RH 1/8″ 1/4-28 3-1/4″ 3″ 75′
14LLE532RH 5/32″ 1/4-28 7/16″ 0″ 0′
14LLP532RH 5/32″ 1/4-28 1-1/2″ 1″ 20′
14LL532RH 5/32″ 1/4-28 2-1/4″ 1-3/4″ 50′
14ASLL532RH 5/32″ 1/4-28 3-1/4″ 3″ 75′
14LLE316RH 3/16″ 1/4-28 7/16″ 0″ 0′
14LLP316RH 3/16″ 1/4-28 1-1/2″ 1″ 20′
14LL316RH 3/16″ 1/4-28 2-1/4″ 1-3/4″ 50′
14ASLL316RH 3/16″ 1/4-28 3-1/4″ 3″ 75′
516LLE316RH 3/16″ 5/16-24 7/16″ 0″ 0′
516LLP316RH 3/16″ 5/16-24 1-1/2″ 1″ 20′
516LL316RH 3/16″ 5/16-24 2-3/8″ 1-3/4″ 50′
516LLE14RH 1/4″ 5/16-24 7/16″ 0″ 0′
516LLP14RH 1/4″ 5/16-24 1-1/2″ 1″ 20′
516LL14RH 1/4″ 5/16-24 2-3/8″ 1-3/4″ 50′
38LLE14RH 1/4″ 3/8-24 7/16″ 0″ 0′
38LLP14RH 1/4″ 3/8-24 1-1/2″ 1″ 20′
38LL14RH 1/4″ 3/8-24 2-3/4″ 1-3/4″ 50′
12LL516RH 5/16″ 1/2-20 3-1/4″ 1-3/4″ 50′
12LL38RH 3/8″ 1/2-20 3-1/4″ 1-3/4″ 50′

Threaded studs are also available with wrench flat. Please call for details and pricing.

Hayn Grip™ – On Site Install

Part # Thread Size Wire Size Adjustment Range Max. Run Length
14HG18RH 1/4-28 1/8″ 1-3/4″ 50′
14HG316RH 1/4-28 3/16″ 1-3/4″ 50′

Handy Crimp™ – On Site Install

Part # Thread Size Wire Size Adjustment Range Max. Run Length
14CLLE18RH 1/4-28 1/8″ 0″ 0′
14CLLP18RH 1/4-28 1/8″ 1″ 20′
14CLL18RH 1/4-28 1/8″ 1-3/4″ 50′
14CLLE316RH 1/4-28 3/16″ 0″ 0′
14CLLP316RH 1/4-28 3/16″ 1″ 20′
14CLL316RH 1/4-28 3/16″ 1-3/4″ 50′
516CLLE316RH 5/16-24 3/16″ 0″ 0′
516CLLP316RH 5/16-24 3/16″ 1″ 20′
516CLL316RH 5/16-24 3/16″ 1-3/4″ 50′
Engineered In America Every Hayn fitting is designed and manufactured at our facility in Rocky Hill, Connecticut — the same American workmanship that has set the standard for stainless steel rigging hardware since 1950.
Cold-Worked Production Hayn fittings are cold-worked, not cast. That distinction matters: the cold-working process refines grain structure, increases fatigue resistance, and produces a fundamentally stronger component — one built to perform when the load comes on it.
Precision Manufacturing Our Rocky Hill production floor runs CNC vertical mills, CNC lathes, large-capacity mill-turn centers, and waterjet cutting systems — all configured to produce hardware that meets exact specifications, every time.
75+ Years of Excellence Hayn has been engineering and manufacturing marine and architectural rigging hardware since 1950. That track record isn't just history, it's the design knowledge, failure data, and continuous improvement that goes into every product we make. 
  • Type 316 stainless steel construction for superior saltwater corrosion resistance
  • Manufactured in Rocky Hill, Connecticut to Hayn's proprietary tolerances
  • Precision-machined using advanced CNC manufacturing equipment



  • Engineered for seamless integration in marine and architectural rigging systems

  • Short lead times on both standard and custom components

  • Backed by 75 years of marine and architectural hardware expertise

Hayn Product Header (2)

Let's Build Something Together

 Hayn has been engineering precision rigging hardware since 1950. So whatever your project demands, you're building with hardware that's been proven at sea and on structure for generations. 
Request Technical Specifications