Call Toll Free (800) 346-4296 | sales@hayn.com

Hi-MOD Compression Forks

316 Stainless Steel
58CTF38 Hi-MOD Compression Forks
Produced by Petersen Stainless in the UK and distributed exclusively by Hayn Enterprises in the USA, the Hi-MOD mechanical terminal is the latest approach in swageless fittings. The terminal design includes a unique crown ring that arranges the wire strands for even spacing around the fitting. This allows each strand to experience the load equally. The design also eliminates the need to bend the wires around the cone, which ensures the cone is in the proper location, and keeps the strands from dropping into the cone slots. These advantages, combined with a longer cone with a more shallow angle, give you the most secure and efficient swageless terminal on the market today. Both the cone and crown ring are fully re-usable allowing for easy inspection and re-use without having to replace anything. We do not require the use of sealant in our fittings. You can, however, fill them with a non-acidic polysulfide or better marine-grade sealant Product Instructions

Imperial Wire Sizes

1×19 7×7 or 7×19 Wire ⌀ D-Pin ⌀ A-Jaw Depth E-Jaw Gap H-Hardware Factor Weight lbs.
14CTF18 14CTF18-7 1/8″ 1/4″ 1/2″ 1/4″ 1-1/4″ 0.06
516CTF532 516CTF532-7 5/32″ 5/16″ 21/32″ 5/16″ 1-1/2″ 0.13
38CTF316 38CTF316-7 3/16″ 3/8″ 3/4″ 3/8″ 1-11/16″ 0.23
38CTF732 38CTF732-7 7/32″ 3/8″ 3/4″ 3/8″ 1-11/16″ 0.23
716CTF14 716CTF14-7 1/4″ 7/16″ 7/8″ 7/16″ 1-15/16″ 0.37
12CTF14 12CTF14-7 1/4″ 1/2″ 1″ 1/2″ 2-1/8″ 0.46
12CTF932 12CTF932-7 9/32″ 1/2″ 1″ 1/2″ 2-1/8″ 0.56
12CTF516 12CTF516-7 5/16″ 1/2″ 1″ 1/2″ 2-1/8″ 0.72
916CTF516 916CTF516-7 5/16″ 9/16″ 1-1/8″ 9/16″ 2-3/4″ 0.99
58CTF516 58CTF516-7 5/16″ 5/8″ 1 1/4″ 5/8″ 2 3/4″ 1.09
58CTF38 58CTF38-7 3/8″ 5/8″ 1-1/4″ 5/8″ 3″ 1.40
34CTF716 34CTF716-7 7/16″ 3/4″ 1-1/2″ 3/4″ 3-3/8″ 1.97
34CTF12 34CTF12-7 1/2″ 3/4″ 1-1/2″ 3/4″ 3-5/8″ 2.7
78CTF916 78CTF916-7 9/16″ 7/8″ 1-3/4″ 7/8″ 4-1/8″ 3.23
1CTF58 1CTF58-7 5/8″ 1″ 1-15/16″ 1″ 4-7/8″ 4.61
118CTF34 118CTF34-7 3/4″ 1-1/8″ 2-9/32″ 1-1/8″ 5-1/4″ 6.28
114CTF78 114CTF78-7 7/8″ 1-1/4″ 2-1/2″ 1-1/4″ 5-3/4″ 8.75
138CTF1 138CTF1-7 1″ 1-3/8″ 2-3/4″ 1-3/8″ 6-1/2″ 14.25

Metric Wire Sizes

1×19 7×7 or 7×19 Cmpct Strnd / Dyform Wire ⌀ D-Pin ⌀ A-Jaw Depth E-Jaw Gap H-Hardware Factor Weight lbs.
14CTFM03 14CTFM03-7 3mm 1/4″ 1/2″ 1/4″ 1-1/4″ 0.06
516CTFM04 516CTFM04-7 4mm 5/16″ 21/32″ 5/16″ 1-1/2″ 0.13
38CTFM05 38CTFM05-7 38CTFM05-D 5mm 3/8″ 3/4″ 3/8″ 1-11/16″ 0.23
716CTFM06 716CTFM06-7 716CTFM06-D 6mm 7/16″ 7/8″ 7/16″ 1-15/16″ 0.37
12CTFM07 12CTFM07-7 12CTFM07-D 7mm 1/2″ 1″ 1/2″ 2-1/8″ 0.56
12CTFM08 12CTFM08-7 12CTFM08-D 8mm 1/2″ 1″ 1/2″ 2-1/8″ 0.72
916CTFM08 916CTFM08-7 916CTFM08-D 8mm 9/16″ 1-1/8″ 9/16″ 2-3/4″ 0.99
58CTFM08 58CTFM08-7 58CTFM08-D 8mm 5/8″ 1-1/4″ 5/8″ 2-3/4″ 1.09
58CTFM10 58CTFM10-7 58CTFM10-D 10mm 5/8″ 1-1/4″ 5/8″ 3″ 1.40
34CTFM12 34CTFM12-7 34CTFM12-D 12mm 3/4″ 1-1/2″ 3/4″ 3-5/8″ 2.70
34CTFM12-CS 12mm 3/4″ 1-1/2″ 3/4″ 3-5/8″ 2.70
78CTFM14 78CTFM14-D 14mm 7/8″ 1-3/4″ 7/8″ 4-1/8″ 3.23
78CTFM14-CS 14mm 7/8″ 1-3/4″ 7/8″ 4-1/8″ 3.23
1CTFM16 1CTFM16-D 16mm 1″ 1-15/16″ 1″ 4-7/8″ 4.61
1CTFM16-CS 16mm 1″ 1-15/16″ 1″ 4-7/8″ 4.61
118CTFM19 118CTFM19-D 19mm 1-1/8″ 2-9/32″ 1-1/8″ 5-1/4″ 6.28
118CTFM19-CS 19mm 1-1/8″ 2-9/32″ 1-1/8″ 5-1/4″ 6.28
114CTFM22 114CTFM22-D 22mm 1-1/4″ 2-1/2″ 1-1/4″ 5-3/4″ 8.75
114CTFM22-CS 22mm 1-1/4″ 2-1/2″ 1-1/4″ 5-3/4″ 8.75
138CTFM26 138CTFM26-D 26mm 1-3/8″ 2-3/4″ 1-3/8″ 6-1/2″ 14.25
138CTFM26-CS 26mm 1-3/8″ 2-3/4″ 1-3/8″ 6-1/2″ 14.25