Skip to content
Close
SEARCH
CONTACT
PHONE HOTLINE: 800-346-4296 E-MAIL: sales@hayn.com
Contact Us
PHONE HOTLINE: 800-346-4296 E-MAIL: sales@hayn.com
Contact Us
Hayn Product Header (2240 x 660 px)

Wire Rope Clips

Hayn Wire Rope Clips are forged Type 316 stainless steel U-bolt clips for creating field-assembled wire rope terminations and loops without swaging equipment, available in eight sizes covering wire diameters from 1/8" through 5/8". 

Strong Where It Matters

Hayn Wire Rope Clips

Wire rope clips are the standard solution for temporary or field-assembled terminations where a swaged or compression fitting isn't practical, and the forged construction provides greater strength and dimensional consistency than cast alternatives. The number of clips required to achieve full cable strength varies by wire size — two clips for wire from 1/8" through 3/8", and three clips for 1/2" through 5/8" — and installing the correct number is essential for the termination to carry the rated load. Manufactured from Type 316 stainless steel for corrosion resistance in marine and outdoor environments. 
Request specifications
wire-rope-clip

Wire Rope Clips

Forged SS Part # Wire Size # Required* Weight lbs.
WRC2 1/8″ 2 0.02
WRC4 5/32″ – 3/16″ 2 0.03
WRC6 7/32″ – 1/4″ 2 0.16
WRC8 9/32″ – 5/16″ 2 0.13
WRC10 3/8″ 2 0.17
WRC12 1/2″ 3 0.51
WRC14 9/16″ 3 0.34
WRC16 5/8″ 3 0.37

*Required quantity is for full strength of cable.

Engineered In America Every Hayn fitting is designed and manufactured at our facility in Rocky Hill, Connecticut — the same American workmanship that has set the standard for stainless steel rigging hardware since 1950.
Cold-Worked Production Hayn fittings are cold-worked, not cast. That distinction matters: the cold-working process refines grain structure, increases fatigue resistance, and produces a fundamentally stronger component — one built to perform when the load comes on it.
Precision Manufacturing Our Rocky Hill production floor runs CNC vertical mills, CNC lathes, large-capacity mill-turn centers, and waterjet cutting systems — all configured to produce hardware that meets exact specifications, every time.
75+ Years of Excellence Hayn has been engineering and manufacturing marine and architectural rigging hardware since 1950. That track record isn't just history, it's the design knowledge, failure data, and continuous improvement that goes into every product we make. 
  • Type 316 stainless steel construction for superior saltwater corrosion resistance
  • Manufactured in Rocky Hill, Connecticut to Hayn's proprietary tolerances
  • Precision-machined using advanced CNC manufacturing equipment



  • Engineered for seamless integration in marine and architectural rigging systems

  • Short lead times on both standard and custom components

  • Backed by 75 years of marine and architectural hardware expertise

Hayn Product Header (2)

Let's Build Something Together

 Hayn has been engineering precision rigging hardware since 1950. So whatever your project demands, you're building with hardware that's been proven at sea and on structure for generations. 
Request Technical Specifications