Skip to content
Close
SEARCH
CONTACT
PHONE HOTLINE: 800-346-4296 E-MAIL: sales@hayn.com
Contact Us
PHONE HOTLINE: 800-346-4296 E-MAIL: sales@hayn.com
Contact Us
Hayn Product Header (5)

Swage Rigging Toggles

Hayn Swage Rigging Toggles provide the angular articulation that standing rigging requires at the chainplate, manufactured from Type 316 stainless steel with swage wire termination built directly into the fitting.
Engineered In America Every Hayn fitting is designed and manufactured at our facility in Rocky Hill, Connecticut — the same American workmanship that has set the standard for stainless steel rigging hardware since 1950.
Cold-Worked Production Hayn fittings are cold-worked, not cast. That distinction matters: the cold-working process refines grain structure, increases fatigue resistance, and produces a fundamentally stronger component — one built to perform when the load comes on it.
Precision Manufacturing Our Rocky Hill production floor runs CNC vertical mills, CNC lathes, large-capacity mill-turn centers, and waterjet cutting systems — all configured to produce hardware that meets exact specifications, every time.
75+ Years of Excellence Hayn has been engineering and manufacturing marine and architectural rigging hardware since 1950. That track record isn't just history, it's the design knowledge, failure data, and continuous improvement that goes into every product we make. 

Swage Rigging Toggles

316 Stainless Steel

Increased jaw depths available. Call for details.

Imperial Wire Sizes
Part # W - Wire Dia D - Pin Dia A - Jaw Depth E - Jaw Gap F - Jaw Width H - Hardware Factor Weight lbs.
14RT18 1/8″ 1/4″ 9/16″ 1/4″ 5/8″ 1-5/8″ 0.09
14RT532 5/32″ 1/4″ 9/16″ 1/4″ 5/8″ 1-5/8″ 0.12
516RT532 5/32″ 5/16″ 5/8″ 5/16″ 3/4″ 1-3/4″ 0.14
516RT316 3/16″ 5/16″ 19/32″ 5/16″ 3/4″ 1-3/4″ 0.17
38RT316 3/16″ 3/8″ 3/4″ 3/8″ 29/32″ 2-5/32″ 0.25
38RT316-X 3/16″ 3/8″ 1-1/8″ 3/8″ 29/32″ 2-9/16″ 0.27
38RT732-X 7/32″ 3/8″ 1-1/8″ 3/8″ 7/8″ 2-15/32″ 0.39
38RT14 1/4″ 3/8″ 13/16″ 3/8″ 29/32″ 2-3/32″ 0.41
38RT14-X 1/4″ 3/8″ 1-3/16″ 3/8″ 29/32″ 2-1/2″ 0.43
12RT14 1/4″ 1/2″ 1-1/16″ 1/2″ 1-5/32″ 2-13/16″ 0.56
12RT14-X 1/4″ 1/2″ 1-3/8″ 1/2″ 1-5/32″ 3-1/8″ 0.58
12RT14-XX 1/4″ 1/2″ 1-9/16″ 1/2″ 1-5/32″ 3-5/16″ 0.61
12RT932 9/32″ 1/2″ 1-1/16″ 1/2″ 1-5/32″ 2-3/4″ 0.64
12RT932-X 9/32″ 1/2″ 1-3/8″ 1/2″ 1-5/32″ 3-1/16″ 0.66
12RT932-XX 9/32″ 1/2″ 1-9/16″ 1/2″ 1-5/32″ 3-1/4″ 0.69
12RT516 5/16″ 1/2″ 1-1/16″ 1/2″ 1-5/32″ 2-7/8″ 0.74
12RT516-X 5/16″ 1/2″ 1-3/8″ 1/2″ 1-5/32″ 3-3/16″ 0.76
12RT516-XX 5/16″ 1/2″ 1-9/16″ 1/2″ 1-5/32″ 3-3/8″ 0.78
58RT516 5/16″ 5/8″ 1-7/16″ 5/8″ 1-1/2″ 3-9/16″ 1.12
58RT516-X 5/16″ 5/8″ 1-11/16″ 5/8″ 1-1/2″ 3-13/16″ 1.20
58RT516-XX 5/16″ 5/8″ 2-1/2″ 5/8″ 1-1/2″ 4-5/8″ 1.35
58RT38 3/8″ 5/8″ 1-7/16″ 5/8″ 1-1/2″ 3-13/16″ 1.25
58RT38-X 3/8″ 5/8″ 1-11/16″ 5/8″ 1-1/2″ 4-1/16″ 1.27
58RT38-XX 3/8″ 5/8″ 2-1/2″ 5/8″ 1-1/2″ 4-7/8″ 1.29
34RT716 7/16″ 3/4″ 1-3/4″ 3/4″ 1-7/8″ 4-5/8″ 2.04
34RT716-X 7/16″ 3/4″ 2-1/16″ 3/4″ 1-7/8″ 4-15/16″ 2.25
34RT716-XX 7/16″ 3/4″ 2-9/16″ 3/4″ 1-7/8″ 5-7/16″ 2.29
34RT716-XXX 7/16″ 3/4″ 2-7/8″ 3/4″ 1-7/8″ 5-3/4″ 2.35
34RT12 1/2″ 3/4″ 1-3/4″ 3/4″ 1-7/8″ 4-15/16″ 2.17
34RT12-X 1/2″ 3/4″ 2-1/16″ 3/4″ 1-7/8″ 5-1/4″ 2.25
34RT12-XX 1/2″ 3/4″ 2-9/16″ 3/4″ 1-7/8″ 5-3/4″ 2.79
34RT12-XXX 1/2″ 3/4″ 2-7/8″ 3/4″ 1-7/8″ 6-1/16″ 2.85
78RT12 1/2″ 7/8″ 2-7/8″ 7/8″ 2-3/8″ 6-1/32″ 2.44
78RT916 9/16″ 7/8″ 2-31/32″ 7/8″ 2-3/8″ 6-7/32″ 3.93
1RT58 5/8″ 1″ 2-5/8″ 1″ 2-1/2″ 6-1/8″ 5.49
118RT34 3/4″ 1-1/8″ 2-3/4″ 1-1/8″ 2-3/4″ 6-1/2″ 9.04
114RT78 7/8″ 1-1/4″ 3-7/8″ 1-1/4″ 3-1/4″ 8-7/8″ 13.77
138RT1 1″ 1-3/8″ 4-5/16″ 1-3/8″ 4″ 9-7/16″ 20.03

Note: -CS is for use with Compact Strand / Dyform.

Metric Wire Sizes
Part # W - Wire Dia D - Pin Dia A - Jaw Depth E - Jaw Gap F - Jaw Width H - Hardware Factor Weight lbs.
14RTM03 3mm 1/4″ 9/16″ 1/4″ 5/8″ 1-5/8″ 0.09
14RTM03-CS 3mm 1/4″ 9/16″ 1/4″ 5/8″ 1-5/8″ 0.11
516RTM04 4mm 5/16″ 5/8″ 5/16″ 3/4″ 1-3/4″ 0.12
516RTM04-CS 4mm 5/16″ 5/8″ 5/16″ 3/4″ 1-3/4″ 0.15
38RTM05 5mm 3/8″ 3/4″ 3/8″ 29/32″ 2-5/32″ 0.24
38RTM05-CS 5mm 3/8″ 3/4″ 3/8″ 29/32″ 2-5/32″ 0.27
38RTM05-X 5mm 3/8″ 1-1/8″ 3/8″ 29/32″ 2-9/16″ 0.27
38RTM06 6mm 3/8″ 13/16″ 3/8″ 29/32″ 2-3/32″ 0.31
38RTM06-X 6mm 3/8″ 1-3/16″ 3/8″ 29/32″ 2-1/2″ 0.43
12RTM06 6mm 1/2″ 1-1/16″ 1/2″ 1-5/32″ 2-13/16″ 0.57
12RTM06-CS 6mm 1/2″ 1-1/16″ 1/2″ 1-5/32″ 2-13/16″ 0.59
12RTM06-X 6mm 1/2″ 1-3/8″ 1/2″ 1-5/32″ 3-1/8″ 0.58
12RTM06-XX 6mm 1/2″ 1-9/16″ 1/2″ 1-5/32″ 3-5/16″ 0.61
12RTM07 7mm 1/2″ 1-1/16″ 1/2″ 1-5/32″ 2-3/4″ 0.57
12RTM07-CS 7mm 1/2″ 1-1/16″ 1/2″ 1-5/32″ 2-3/4″ 0.62
12RTM07-X 7mm 1/2″ 1-3/8″ 1/2″ 1-5/32″ 3-1/16″ 0.66
12RTM07-XX 7mm 1/2″ 1-9/16″ 1/2″ 1-5/32″ 3-1/4″ 0.69
12RTM08 8mm 1/2″ 1-1/16″ 1/2″ 1-5/32″ 2-7/8″ 0.72
12RTM08-CS 8mm 1/2″ 1-1/16″ 1/2″ 1-5/32″ 2-7/8″ 0.75
12RTM08-X 8mm 1/2″ 1-3/8″ 1/2″ 1-5/32″ 3-3/16″ 0.76
12RTM08-XX 8mm 1/2″ 1-9/16″ 1/2″ 1-5/32″ 3-3/8″ 0.78
58RTM08 8mm 5/8″ 1-7/16″ 5/8″ 1-1/2″ 3-9/16″ 1.13
58RTM08-CS 8mm 5/8″ 1-7/16″ 5/8″ 1-1/2″ 3-9/16″ 1.20
58RTM08-X 8mm 5/8″ 1-11/16″ 5/8″ 1-1/2″ 3-13/16″ 1.20
58RTM08-XX 8mm 5/8″ 2-1/2″ 5/8″ 1-1/2″ 4-5/8″ 1.35
58RTM10 10mm 5/8″ 1-7/16″ 5/8″ 1-1/2″ 3-13/16″ 1.09
58RTM10-CS 10mm 5/8″ 1-7/16″ 5/8″ 1-1/2″ 3-13/16″ 1.25
58RTM10-X 10mm 5/8″ 1-11/16″ 5/8″ 1-1/2″ 4-1/16″ 1.27
58RTM10-XX 10mm 5/8″ 2-1/2″ 5/8″ 1-1/2″ 4-7/8″ 1.29
34RTM10-CS 10mm 3/4″ 1-3/16″ 3/4″ 1-7/8″ 4-3/4″ 2.50
34RTM11 11mm 3/4″ 1-3/4″ 3/4″ 1-7/8″ 4-5/8″ 2.03
34RTM11-X 11mm 3/4″ 2-1/16″ 3/4″ 1-7/8″ 4-15/16″ 2.25
34RTM11-XX 11mm 3/4″ 2-9/16″ 3/4″ 1-7/8″ 5-7/16″ 2.29
34RTM11-XXX 11mm 3/4″ 2-7/8″ 3/4″ 1-7/8″ 5-3/4″ 2.35
34RTM12 12mm 3/4″ 1-3/4″ 3/4″ 1-7/8″ 4-15/16″ 2.22
34RTM12-CS 12mm 3/4″ 1-3/4″ 3/4″ 1-7/8″ 4-15/16″ 4.10
34RTM12-X 12mm 3/4″ 2-1/16″ 3/4″ 1-7/8″ 5-1/4″ 2.25
34RTM12-XX 12mm 3/4″ 2-9/16″ 3/4″ 1-7/8″ 5-3/4″ 2.79
34RTM12-XXX 12mm 3/4″ 2-7/8″ 3/4″ 1-7/8″ 6-1/16″ 2.85
78RTM12 12mm 7/8″ 2-7/8″ 7/8″ 2-3/8″ 6-1/32″ 3.84
78RTM12-CS 12mm 7/8″ 2-7/8″ 7/8″ 2-3/8″ 6-1/32″ 4.45
78RTM14 14mm 7/8″ 2-31/32″ 7/8″ 2-3/8″ 6-7/32″ 4.35
78RTM14-CS 14mm 7/8″ 2-31/32″ 7/8″ 2-3/8″ 6-7/32″ 5.10
1RTM14-CS 14mm 1″ 2-5/8″ 1″ 2-1/2″ 6-1/8″ 6.10
1RTM16 16mm 1″ 2-5/8″ 1″ 2-1/2″ 6-1/8″ 5.49
1RTM16-CS 16mm 1″ 2-5/8″ 1″ 2-1/2″ 6-1/8″ 6.50
118RTM16-CS 16mm 1-1/8″ 2-3/4″ 1-1/8″ 2-3/4″ 6-11/16″ 9.25
118RTM19 19mm 1-1/8″ 2-3/4″ 1-1/8″ 2-3/4″ 6-1/2″ 9.04
118RTM19-CS 19mm 1-1/8″ 2-3/4″ 1-1/8″ 2-3/4″ 7-1/4″ 10.10
114RTM19-CS 19mm 1-1/4″ 3-7/8″ 1-1/4″ 3-1/4″ 8-7/8″ 13.75
114RTM22 22mm 1-1/4″ 3-7/8″ 1-1/4″ 3-1/4″ 8-7/8″ 13.77
138RTM26 26mm 1-3/8″ 4-5/16″ 1-3/8″ 4″ 9-7/16″ 20.03
Strong Where It Matters

Swage Rigging Toggles

By combining the toggle and swage terminal into a single fitting, the Swage Rigging Toggle eliminates one connection point from the rigging system while allowing the wire to move freely through its working arc without side-loading the terminal. This is one of the most fatigue-prone areas in a standing rig, and reducing the hardware count here has real long-term reliability benefits. Available across an extensive range of imperial and metric wire sizes, with standard and extended jaw depth options on many sizes to accommodate varying chainplate configurations. 
Request specifications
58RT38web-scaled

Superior Material Quality

Manufactured from premium 316 marine-grade stainless steel, Hayn products deliver exceptional corrosion resistance and structural integrity in demanding environments. Precision-machined using advanced automation technology, each component meets rigorous quality standards. Engineered for marine, architectural, and industrial applications.
View specifications
hayn product 1
  • Type 316 stainless steel construction for superior saltwater corrosion resistance
  • Manufactured in Rocky Hill, Connecticut to Hayn's proprietary tolerances
  • Precision-machined using advanced CNC manufacturing equipment



  • Engineered for seamless integration in marine and architectural rigging systems

  • Short lead times on both standard and custom components

  • Backed by 75 years of marine and architectural hardware expertise

Hayn Product Header (2)

Let's Build Something Together

 Hayn has been engineering precision rigging hardware since 1950. So whatever your project demands, you're building with hardware that's been proven at sea and on structure for generations. 
Request Technical Specifications