Skip to content
Close
SEARCH
CONTACT
PHONE HOTLINE: 800-346-4296 E-MAIL: sales@hayn.com
Contact Us
PHONE HOTLINE: 800-346-4296 E-MAIL: sales@hayn.com
Contact Us
Hayn Product Header

Swage Marine Eyes

Hayn Swage Marine Eyes provide a clean, permanent wire termination in Type 316 stainless steel, engineered to integrate directly with shackles, toggles, and other standard marine rigging hardware.
Engineered In America Every Hayn fitting is designed and manufactured at our facility in Rocky Hill, Connecticut — the same American workmanship that has set the standard for stainless steel rigging hardware since 1950.
Cold-Worked Production Hayn fittings are cold-worked, not cast. That distinction matters: the cold-working process refines grain structure, increases fatigue resistance, and produces a fundamentally stronger component — one built to perform when the load comes on it.
Precision Manufacturing Our Rocky Hill production floor runs CNC vertical mills, CNC lathes, large-capacity mill-turn centers, and waterjet cutting systems — all configured to produce hardware that meets exact specifications, every time.
75+ Years of Excellence Hayn has been engineering and manufacturing marine and architectural rigging hardware since 1950. That track record isn't just history, it's the design knowledge, failure data, and continuous improvement that goes into every product we make. 

Swage Marine Eyes — Imperial Wire Sizes

316 Stainless Steel

Part # W - Wire Ø D - Hole Ø H - Hardware Factor J - Eye Width Weight lbs.
ME2 1/16″ 1/4″ 3/4″ 7/32″ 0.03
ME3 3/32″ 1/4″ 13/16″ 7/32″ 0.03
ME4 1/8″ 1/4″ 11/16″ 7/32″ 0.04
ME5A 5/32″ 1/4″ 11/16″ 7/32″ 0.04
ME5 5/32″ 5/16″ 13/16″ 1/4″ 0.05
ME6A 3/16″ 5/16″ 3/4″ 1/4″ 0.10
ME6 3/16″ 3/8″ 15/16″ 5/16″ 0.09
ME7DS 7/32″ 3/8″ 1 1/8″ 5/16″ 0.16
ME7 7/32″ 7/16″ 1 1/8″ 3/8″ 0.17
ME8A 1/4″ 3/8″ 7/8″ 5/16″ 0.19
ME8DS 1/4″ 7/16″ 1 5/32″ 3/8″ 0.24
ME8 1/4″ 1/2″ 1 1/8″ 3/8″ 0.22
ME9 9/32″ 1/2″ 1 3/32″ 15/32″ 0.28
ME10A 5/16″ 1/2″ 1 3/16″ 1/2″ 0.37
ME10 5/16″ 5/8″ 1 5/16″ 1/2″ 0.44
ME10B 5/16″ 9/16″ 1 3/16″ 1/2″ 0.41
ME12 3/8″ 5/8″ 1 9/16″ 9/16″ 0.57
ME14 7/16″ 3/4″ 1 15/16″ 11/16″ 0.99
ME16A 1/2″ 3/4″ 2 7/32″ 11/16″ 1.25
ME16 1/2″ 7/8″ 2 1/16″ 7/8″ 1.12
ME18 9/16″ 7/8″ 2 1/4″ 13/16″ 1.65
ME20 5/8″ 1″ 2 5/16″ 15/16″ 2.32
ME24 3/4″ 1 1/8″ 2 1/2″ 1 1/32″ 4.14
ME28 7/8″ 1 1/4″ 3 7/16″ 1 3/16″ 6.55
ME32 1″ 1 3/8″ 3 1/2″ 1 3/8″ 8.95

Swage Marine Eyes — Metric Wire Sizes

316 Stainless Steel. Note: “-CS” is for use with Compact Strand / Dyform.

Part # W - Wire Ø D - Hole Ø H - Hardware Factor J - Eye Width Weight lbs.
MEM03 3mm 1/4″ 11/16″ 7/32″ 0.03
MEM03-CS 3mm 1/4″ 11/16″ 7/32″ 0.03
MEM04 4mm 5/16″ 13/16″ 1/4″ 0.05
MEM04-CS 4mm 5/16″ 13/16″ 1/4″ 0.05
MEM05 5mm 3/8″ 15/16″ 5/16″ 0.09
MEM05-CS 5mm 3/8″ 15/16″ 5/16″ 0.09
MEM06A 6mm 3/8″ 7/8″ 5/16″ 0.12
MEM06 6mm 1/2″ 1 1/8″ 3/8″ 0.22
MEM06-CS 6mm 1/2″ 1 1/8″ 3/8″ 0.24
MEM07 7mm 1/2″ 1 3/32″ 15/32″ 0.28
MEM07-CS 7mm 1/2″ 1 3/32″ 15/32″ 0.32
MEM08A 8mm 1/2″ 1 3/16″ 1/2″ 0.44
MEM08A-CS 8mm 1/2″ 1 3/16″ 1/2″ 0.43
MEM08 8mm 5/8″ 1 5/16″ 1/2″ 0.37
MEM08-CS 8mm 5/8″ 1 5/16″ 1/2″ 0.49
MEM10 10mm 5/8″ 1 9/16″ 9/16″ 0.57
MEM10-CS 10mm 5/8″ 1 9/16″ 9/16″ 0.65
MEM10US-CS 10mm 3/4″ 2 1/16″ 11/16″ 0.89
MEM11 11mm 3/4″ 1 15/16″ 11/16″ 0.99
MEM12 12mm 3/4″ 2 7/32″ 11/16″ 1.12
MEM12-CS 12mm 3/4″ 2 7/32″ 11/16″ 1.26
MEM12US 12mm 7/8″ 2 1/16″ 7/8″ 1.32
MEM12US-CS 12mm 7/8″ 2 1/16″ 7/8″ 1.40
MEM14 14mm 7/8″ 2 1/4″ 13/16″ 1.65
MEM14-CS 14mm 7/8″ 2 1/4″ 13/16″ 1.84
MEM14US-CS 14mm 1″ 1 1/2″ 15/16″ 2.06
MEM16 16mm 1″ 2 5/16″ 15/16″ 2.32
MEM16-CS 16mm 1″ 2 5/16″ 15/16″ 2.47
MEM16US-CS 16mm 1 1/8″ 2 11/16″ 1 1/16″ 2.91
MEM19 19mm 1 1/8″ 2 1/2″ 1 1/32″ 4.14
MEM19-CS 19mm 1 1/8″ 2 1/2″ 1 1/32″ 4.14
MEM19US-CS 19mm 1 1/4″ 3 7/16″ 1 3/16″ 5.47
MEM22 22mm 1 1/4″ 3 7/16″ 1 3/16″ 6.55
MEM26 26mm 1 3/8″ 3 1/2″ 1 3/8″ 8.95
Strong Where It Matters

Hayn Swage Marine Eyes

The swaged eye creates a fixed, high-strength loop at the wire end with no moving parts and no hardware factor concerns at the connection point. Manufactured to Hayn's precision tolerances, these fittings are available across one of the broadest size ranges in the industry, covering imperial wire sizes from 1/16" through 1" and metric sizes from 3mm through 26mm, with compact strand and Dyform options on many sizes. 
Request specifications
ME12web-scaled

Superior Material Quality

Manufactured from premium 316 marine-grade stainless steel, Hayn products deliver exceptional corrosion resistance and structural integrity in demanding environments. Precision-machined using advanced automation technology, each component meets rigorous quality standards. Engineered for marine, architectural, and industrial applications.
View specifications
hayn product 1
  • Type 316 stainless steel construction for superior saltwater corrosion resistance
  • Manufactured in Rocky Hill, Connecticut to Hayn's proprietary tolerances
  • Precision-machined using advanced CNC manufacturing equipment



  • Engineered for seamless integration in marine and architectural rigging systems

  • Short lead times on both standard and custom components

  • Backed by 75 years of marine and architectural hardware expertise

Hayn Product Header (2)

Let's Build Something Together

 Hayn has been engineering precision rigging hardware since 1950. So whatever your project demands, you're building with hardware that's been proven at sea and on structure for generations. 
Request Technical Specifications