Skip to content
Close
SEARCH
CONTACT
PHONE HOTLINE: 800-346-4296 E-MAIL: sales@hayn.com
Contact Us
PHONE HOTLINE: 800-346-4296 E-MAIL: sales@hayn.com
Contact Us
Hayn Product Header (2240 x 660 px)

Short Rigging Adjuster

The Hayn Short Rigging Adjuster is a compact Type 316 stainless steel swage terminal adjuster for small-diameter wire rigging, providing tension adjustment at the chainplate end in a low-profile fitting sized for 3/32" and 1/8" wire. 

Strong Where It Matters

Short Rigging Adjuster

The short body is the right choice where clearance between the chainplate fitting and the first obstruction is limited, keeping the overall assembly length as compact as possible without sacrificing the ability to fine-tune rig tension. Open length is 4-3/4" and closed length is 3-3/4" across both configurations, with a 1/4" pin diameter and jaw depths of 1" and 31/32" for 3/32" and 1/8" wire respectively. Manufactured from Type 316 stainless steel for long-term corrosion resistance in saltwater environments. 
Request specifications
short rigging adjuster

Short Rigging Adjuster

Part # W-Wire Diameter D-Pin Diameter O-Open L C-Closed L A-Jaw Depth E-Jaw Gap Weight lbs.
14AR332 3/32″ 1/4″ 4-3/4″ 3-3/4″ 1″ min. 5/16″ 0.15
14AR18 1/8″ 1/4″ 4-3/4″ 3-3/4″ 31/32″ min. 5/16″ 0.18
Engineered In America Every Hayn fitting is designed and manufactured at our facility in Rocky Hill, Connecticut — the same American workmanship that has set the standard for stainless steel rigging hardware since 1950.
Cold-Worked Production Hayn fittings are cold-worked, not cast. That distinction matters: the cold-working process refines grain structure, increases fatigue resistance, and produces a fundamentally stronger component — one built to perform when the load comes on it.
Precision Manufacturing Our Rocky Hill production floor runs CNC vertical mills, CNC lathes, large-capacity mill-turn centers, and waterjet cutting systems — all configured to produce hardware that meets exact specifications, every time.
75+ Years of Excellence Hayn has been engineering and manufacturing marine and architectural rigging hardware since 1950. That track record isn't just history, it's the design knowledge, failure data, and continuous improvement that goes into every product we make. 
  • Type 316 stainless steel construction for superior saltwater corrosion resistance
  • Manufactured in Rocky Hill, Connecticut to Hayn's proprietary tolerances
  • Precision-machined using advanced CNC manufacturing equipment



  • Engineered for seamless integration in marine and architectural rigging systems

  • Short lead times on both standard and custom components

  • Backed by 75 years of marine and architectural hardware expertise

Hayn Product Header (2)

Let's Build Something Together

 Hayn has been engineering precision rigging hardware since 1950. So whatever your project demands, you're building with hardware that's been proven at sea and on structure for generations. 
Request Technical Specifications