Skip to content
Close
SEARCH
CONTACT
PHONE HOTLINE: 800-346-4296 E-MAIL: sales@hayn.com
Contact Us
PHONE HOTLINE: 800-346-4296 E-MAIL: sales@hayn.com
Contact Us
Hayn Product Header (2240 x 660 px)

Long Rigging Adjuster

Hayn Long Rigging Adjusters are Type 316 stainless steel swage terminal adjusters with an extended body that provides greater tension adjustment range than a standard adjuster, designed for small-diameter wire rigging applications from 3/32" through 5/32". 

Strong Where It Matters

Long Rigging Adjuster

The extended body length gives riggers more working travel during initial tensioning and seasonal adjustment, which is particularly useful on longer wire runs where small fitting adjustments need to account for greater cumulative variation in cable length. Open lengths of 7-1/8" and 7-3/8" depending on configuration provide substantially more adjustment range than a standard fitting, with pin diameters of 3/16" and 1/4" covering the range of connection hardware common in small-boat and light rigging applications. Available in four configurations covering wire diameters from 3/32" through 5/32", manufactured from Type 316 stainless steel throughout. 
Request specifications
long rigging adjuster

Long Rigging Adjuster

Part # W-Wire Diameter D-Pin Diameter O-Open L C-Closed L A-Jaw Depth E-Jaw Gap Weight lbs.
10SA332 3/32″ 3/16″ 7-1/8″ 5-1/8″ 1-1/4″ min. 5/16″ 0.18
10SA18 1/8″ 3/16″ 7-1/8″ 5-1/8″ 1-1/4″ min. 5/16″ 0.19
14SA18 1/8″ 1/4″ 7-3/8″ 5-1/4″ 1-5/16″ min. 5/16″ 0.20
14SA532 5/32″ 1/4″ 7-3/8″ 5-1/4″ 1-5/16″ min. 5/16″ 0.21
Engineered In America Every Hayn fitting is designed and manufactured at our facility in Rocky Hill, Connecticut — the same American workmanship that has set the standard for stainless steel rigging hardware since 1950.
Cold-Worked Production Hayn fittings are cold-worked, not cast. That distinction matters: the cold-working process refines grain structure, increases fatigue resistance, and produces a fundamentally stronger component — one built to perform when the load comes on it.
Precision Manufacturing Our Rocky Hill production floor runs CNC vertical mills, CNC lathes, large-capacity mill-turn centers, and waterjet cutting systems — all configured to produce hardware that meets exact specifications, every time.
75+ Years of Excellence Hayn has been engineering and manufacturing marine and architectural rigging hardware since 1950. That track record isn't just history, it's the design knowledge, failure data, and continuous improvement that goes into every product we make. 
  • Type 316 stainless steel construction for superior saltwater corrosion resistance
  • Manufactured in Rocky Hill, Connecticut to Hayn's proprietary tolerances
  • Precision-machined using advanced CNC manufacturing equipment



  • Engineered for seamless integration in marine and architectural rigging systems

  • Short lead times on both standard and custom components

  • Backed by 75 years of marine and architectural hardware expertise

Hayn Product Header (2)

Let's Build Something Together

 Hayn has been engineering precision rigging hardware since 1950. So whatever your project demands, you're building with hardware that's been proven at sea and on structure for generations. 
Request Technical Specifications