Skip to content
Close
SEARCH
CONTACT
PHONE HOTLINE: 800-346-4296 E-MAIL: sales@hayn.com
Contact Us
PHONE HOTLINE: 800-346-4296 E-MAIL: sales@hayn.com
Contact Us
Hayn Product Header (6)

NAVTEC BY HAYN

The NAVTEC L200 Aluminum Rod Spreader Bend is an aluminum alloy fitting that covers and protects rod rigging as it passes over the spreader tip, ideally suited for masts where the shroud-to-spreader angle change falls between 1 and 15 degrees. 

NAVTEC by Hayn - Strong Where It Matters

NAVTEC L200 Aluminum Rod Spreader Bend

The spreader bend serves two functions: it protects the rod from chafe and abrasion at the spreader tip contact point, and it provides a smooth bearing surface that allows the rod to deflect through its working angle without stress concentration at that contact point. Selecting the correct configuration requires matching both the rod size and the required grip length to the specific spreader geometry — multiple grip lengths are available for rod sizes -04 through -17 to accommodate varying spreader tip widths and deflection angles. Available in 22 standard configurations covering rod sizes from -04 through -30, with both Hayn and legacy NAVTEC part numbers listed for cross-referencing when replacing existing hardware. 
Request specifications
L200

NAVTEC L200 Aluminum Rod Spreader Bend

Hayn Part # NAVTEC # W-Rod Size B-Body Dia. G-Grip Length L-Length HD-Head ⌀
HYN-L200-04-24 L200-004-24 -04 0.30″ 0.75″ 1.30″ 0.50″
HYN-L200-04-32 L200-004-32 -04 0.30″ 1.00″ 1.55″ 0.50″
HYN-L200-06-28 L200-006-28 -06 0.36″ 0.88″ 1.41″ 0.63″
HYN-L200-06-32 L200-006-32 -06 0.36″ 1.00″ 1.53″ 0.63″
HYN-L200-06-48 L200-006-48 -06 0.36″ 1.50″ 2.03″ 0.63″
HYN-L200-08-32 L200-008-32 -08 0.42″ 1.00″ 1.98″ 0.69″
HYN-L200-08-40 L200-008-40 -08 0.42″ 1.25″ 2.23″ 0.69″
HYN-L200-08-64 L200-008-64 -08 0.42″ 2.00″ 2.98″ 0.69″
HYN-L200-10-32 L200-010-32 -10 0.42″ 1.00″ 1.98″ 0.69″
HYN-L200-10-40 L200-010-40 -10 0.42″ 1.25″ 2.23″ 0.69″
HYN-L200-10-64 L200-010-64 -10 0.42″ 2.00″ 2.98″ 0.69″
HYN-L200-12-40 L200-012-40 -12 0.48″ 1.25″ 2.15″ 0.75″
HYN-L200-12-48 L200-012-48 -12 0.48″ 1.50″ 2.40″ 0.75″
HYN-L200-12-64 L200-012-64 -12 0.48″ 2.00″ 2.90″ 0.75″
HYN-L200-15-48 L200-015-48 -15 0.50″ 1.50″ 2.46″ 0.75″
HYN-L200-15-64 L200-015-64 -15 0.50″ 2.00″ 2.96″ 0.75″
HYN-L200-17-48 L200-017-48 -17 0.55″ 1.50″ 2.50″ 0.75″
HYN-L200-17-56 L200-017-56 -17 0.55″ 1.75″ 2.75″ 0.75″
HYN-L200-17-64 L200-017-64 -17 0.55″ 2.00″ 3.00″ 0.75″
HYN-L200-22-56 L200-022-56 -22 0.60″ 1.75″ 3.10″ 1.00″
HYN-L200-22-64 L200-022-64 -22 0.60″ 2.00″ 3.35″ 1.00″
HYN-L200-30-48 L200-030-48 -30 0.60″ 2.00″ 3.15″ 1.00″
Engineered In America Every Hayn fitting is designed and manufactured at our facility in Rocky Hill, Connecticut — the same American workmanship that has set the standard for stainless steel rigging hardware since 1950.
Cold-Worked Production Hayn fittings are cold-worked, not cast. That distinction matters: the cold-working process refines grain structure, increases fatigue resistance, and produces a fundamentally stronger component — one built to perform when the load comes on it.
NAVTEC ENGINEERING STANDARDS NAVTEC components are engineered to perform under the exact conditions that demand the most from your rigging — offshore passages, high-load racing applications, and everything in between. Every fitting is precision-machined to tight tolerances, built from high-grade stainless steel, and designed to integrate seamlessly into rod rigging systems where failure is not an option. 
YOUR EXCLUSIVE SOURCE FOR NAVTEC Hayn is the sole authorized manufacturer and supplier of NAVTEC rigging components. That means every part you order is made to the original specifications, backed by Hayn's manufacturing expertise, and supported by our team in Rocky Hill. There is no other legitimate source for new NAVTEC product — what you get here is the real thing. 
  • Type 316 stainless steel construction for superior saltwater corrosion resistance
  • Manufactured in Rocky Hill, Connecticut to Hayn's proprietary tolerances
  • Precision-machined using advanced CNC manufacturing equipment



  • Engineered for seamless integration in marine and architectural rigging systems

  • Short lead times on both standard and custom components

  • Backed by 75 years of marine and architectural hardware expertise

Hayn Product Header (2)

Let's Build Something Together

 Hayn has been engineering precision rigging hardware since 1950. So whatever your project demands, you're building with hardware that's been proven at sea and on structure for generations. 
Request Technical Specifications