Skip to content
Close
SEARCH
CONTACT
PHONE HOTLINE: 800-346-4296 E-MAIL: sales@hayn.com
Contact Us
PHONE HOTLINE: 800-346-4296 E-MAIL: sales@hayn.com
Contact Us
Hayn Product Header (2240 x 660 px)

Hi-MOD Compression Toggles

Hayn Hi-MOD Compression Toggles combine the field-installable Hi-MOD compression terminal body with an integrated articulating toggle jaw, delivering angular freedom at the wire end without requiring a separate toggle fitting in the assembly. 

Strong Where It Matters

Hi-MOD Compression Toggles

Integrating the toggle jaw directly into the compression terminal eliminates one connection point from the rigging system while preserving the side-load protection that a toggle provides at the chainplate or turnbuckle end. Like all Hi-MOD terminals, the crown ring spaces wire strands evenly around the cone so each one carries equal load, and both cone and crown ring are fully reusable for inspection and reassembly without replacing any components. One of the broadest-range compression fittings in the Hayn catalog, available for 1x19 and 7-strand imperial wire from 1/8" through 5/8", and metric wire from 3mm through 16mm in 1x19, 7-strand, Compact Strand, and Dyform configurations, with standard and extended jaw depth options across most sizes. 
Request specifications
hi mod compression toggles

Imperial Wire Sizes

1×19 7×7 or 7×19 Wire ⌀ D-Pin ⌀ A-Jaw Depth E-Jaw Gap H-Hardware Factor Weight lbs.
14CTT18 14CTT18-7 1/8″ 1/4″ 9/16″ 1/4″ 1-3/4″ 0.10
516CTT532 516CTT532-7 5/32″ 5/16″ 5/8″ 5/16″ 2-1/32″ 0.17
38CTT316 38CTT316-7 3/16″ 3/8″ 3/4″ 3/8″ 2-9/16″ 0.30
38CTT316-X 38CTT316-7-X 3/16″ 3/8″ 1-1/8″ 3/8″ 2-15/16″ 0.33
38CTT732 38CTT732-7 7/32″ 3/8″ 3/4″ 3/8″ 2-9/16″ 0.30
38CTT732-X 38CTT732-7-X 7/32″ 3/8″ 1-1/8″ 3/8″ 2-15/16″ 0.33
38CTT14 38CTT14-7 1/4″ 3/8″ 3/4″ 3/8″ 2-5/8″ 0.36
38CTT14-X 38CTT14-7-X 1/4″ 3/8″ 1-1/8″ 3/8″ 3″ 0.39
12CTT14 12CTT14-7 1/4″ 1/2″ 1-1/8″ 1/2″ 3-5/16″ 0.63
12CTT14-X 12CTT14-7-X 1/4″ 1/2″ 1-7/16″ 1/2″ 3-5/8″ 0.85
12CTT14-XX 12CTT14-7-XX 1/4″ 1/2″ 1-5/8″ 1/2″ 3-13/16″ 0.87
12CTT932 12CTT932-7 9/32″ 1/2″ 1-1/8″ 1/2″ 3-7/16″ 0.72
12CTT932-X 12CTT932-7-X 9/32″ 1/2″ 1-7/16″ 1/2″ 3-3/4″ 0.94
12CTT932-XX 12CTT932-7-XX 9/32″ 1/2″ 1-5/8″ 1/2″ 3-15/16″ 0.96
12CTT516 12CTT516-7 5/16″ 1/2″ 1-1/8″ 1/2″ 3-5/8″ 0.88
12CTT516-X 12CTT516-7-X 5/16″ 1/2″ 1-7/16″ 1/2″ 3-15/16″ 1.10
12CTT516-XX 12CTT516-7-XX 5/16″ 1/2″ 1-5/8″ 1/2″ 4-1/8″ 1.12
916CTT516 916CTT516-7 5/16″ 9/16″ 1-1/4″ 9/16″ 4″ 1.35
58CTT516 58CTT516-7 5/16″ 5/8″ 1-1/4″ 5/8″ 4-1/2″ 1.41
58CTT516-X 58CTT516-7-X 5/16″ 5/8″ 1-1/2″ 5/8″ 4-3/4″ 1.83
58CTT516-XX 58CTT516-7-XX 5/16″ 5/8″ 2-5/16″ 5/8″ 5-9/16″ 1.96
58CTT38 58CTT38-7 3/8″ 5/8″ 1-1/4″ 5/8″ 4-9/16″ 1.68
58CTT38-X 58CTT38-7-X 3/8″ 5/8″ 1-1/2″ 5/8″ 4-13/16″ 2.10
58CTT38-XX 58CTT38-7-XX 3/8″ 5/8″ 2-5/16″ 5/8″ 5-5/8″ 2.23
34CTT716 34CTT716-7 7/16″ 3/4″ 1-7/8″ 3/4″ 5-13/16″ 2.54
34CTT716-X 34CTT716-7-X 7/16″ 3/4″ 2-3/16″ 3/4″ 6-1/8″ 3.42
34CTT716-XX 34CTT716-7-XX 7/16″ 3/4″ 2-11/16″ 3/4″ 6-5/8″ 3.54
34CTT716-XXX 34CTT716-7-XXX 7/16″ 3/4″ 3″ 3/4″ 6-15/16″ 3.63
34CTT12 34CTT12-7 1/2″ 3/4″ 1-7/8″ 3/4″ 5-13/16″ 3.01
34CTT12-X 34CTT12-7-X 1/2″ 3/4″ 2-3/16″ 3/4″ 6-1/8″ 3.89
34CTT12-XX 34CTT12-7-XX 1/2″ 3/4″ 2-11/16″ 3/4″ 6-5/8″ 4.01
34CTT12-XXX 34CTT12-7-XXX 1/2″ 3/4″ 3″ 3/4″ 6-15/16″ 4.10
78CTT916 78CTT916-7 9/16″ 7/8″ 2-7/8″ 7/8″ 7-3/8″ 5.54
1CTT58 1CTT58-7 5/8″ 1″ 2-5/8″ 1″ 7-1/2″ 7.35

Metric Wire Sizes

1×19 7×7 or 7×19 Cmpct Strnd / Dyform Wire ⌀ D-Pin ⌀ A-Jaw Depth E-Jaw Gap H-Hardware Factor Weight lbs.
14CTTM03 14CTTM03-7 – 3mm 1/4″ 9/16″ 1/4″ 1-3/4″ 0.10
516CTTM04 516CTTM04-7 – 4mm 5/16″ 5/8″ 5/16″ 2-1/32″ 0.17
38CTTM05 38CTTM05-7 38CTTM05-D 5mm 3/8″ 3/4″ 3/8″ 2-9/16″ 0.30
38CTTM05-X 38CTTM05-7-X 38CTTM05-D-X 5mm 3/8″ 1-1/8″ 3/8″ 2-15/16″ 0.33
38CTTM06 38CTTM06-7 38CTTM06-D 6mm 3/8″ 3/4″ 3/8″ 2-9/16″ 0.36
38CTTM06-X 38CTTM06-7-X 38CTTM06-D-X 6mm 3/8″ 1-1/8″ 3/8″ 2-15/16″ 0.39
12CTTM06 12CTTM06-7 12CTTM06-D 6mm 1/2″ 3/4″ 1/2″ 3-5/16″ 0.63
12CTTM06-X 12CTTM06-7-X 12CTTM06-D-X 6mm 1/2″ 1-7/16″ 1/2″ 3-5/8″ 0.70
12CTTM06-XX 12CTTM06-7-XX 12CTTM06-D-XX 6mm 1/2″ 1-5/8″ 1/2″ 3-13/16″ 0.72
12CTTM07 12CTTM07-7 12CTTM07-D 7mm 1/2″ 1-1/8″ 1/2″ 3-7/16″ 0.72
12CTTM07-X 12CTTM07-7-X 12CTTM07-D-X 7mm 1/2″ 1-7/16″ 1/2″ 3-3/4″ 0.79
12CTTM07-XX 12CTTM07-7-XX 12CTTM07-D-XX 7mm 1/2″ 1-5/8″ 1/2″ 3-15/16″ 0.81
12CTTM08 12CTTM08-7 12CTTM08-D 8mm 1/2″ 1-1/8″ 1/2″ 3-5/8″ 0.88
12CTTM08-X 12CTTM08-7-X 12CTTM08-D-X 8mm 1/2″ 1-7/16″ 1/2″ 3-15/16″ 1.10
12CTTM08-XX 12CTTM08-7-XX 12CTTM08-D-XX 8mm 1/2″ 1-5/8″ 1/2″ 4-1/8″ 1.12
916CTTM08 916CTTM08-7 916CTTM08-D 8mm 9/16″ 1-1/8″ 9/16″ 4-1/2″ 2.35
58CTTM08 58CTTM08-7 58CTTM08-D 8mm 5/8″ 1-1/4″ 5/8″ 4-1/2″ 1.41
58CTTM08-X 58CTTM08-7-X 58CTTM08-D-X 8mm 5/8″ 1-1/2″ 5/8″ 4-3/4″ 1.83
58CTTM08-XX 58CTTM08-7-XX 58CTTM08-D-XX 8mm 5/8″ 2-5/16″ 5/8″ 5-9/16″ 1.96
58CTTM10 58CTTM10-7 58CTTM10-D 10mm 5/8″ 1-1/4″ 5/8″ 4-9/16″ 1.68
58CTTM10-X 58CTTM10-7-X 58CTTM10-D-X 10mm 5/8″ 1-1/2″ 5/8″ 4-13/16″ 2.10
58CTTM10-XX 58CTTM10-7-XX 58CTTM10-D-XX 10mm 5/8″ 2-5/16″ 5/8″ 5-5/8″ 2.23
34CTTM12 34CTTM12-7 34CTTM12-D 12mm 3/4″ 1-7/8″ 3/4″ 4-9/16″ 3.01
– – 34CTTM12-CS 12mm 3/4″ 1-7/8″ 3/4″ 4-9/16″ 3.01
34CTTM12-X 34CTTM12-7-X 34CTTM12-CS-X 12mm 3/4″ 2-3/16″ 3/4″ 6-1/8″ 3.91
34CTTM12-XX 34CTTM12-7-XX 34CTTM12-CS-XX 12mm 3/4″ 2-11/16″ 3/4″ 6-5/8″ 4.12
34CTTM12-XXX 34CTTM12-7-XXX 34CTTM12-CS-XXX 12mm 3/4″ 3″ 3/4″ 6-15/16″ 4.32
78CTTM14 78CTTM14-7 78CTTM14-D 14mm 7/8″ 2-7/8″ 7/8″ 7-3/8″ 5.54
– – 78CTTM14-CS 14mm 7/8″ 2-7/8″ 7/8″ 7-3/8″ 5.54
1CTTM16 1CTTM16-7 1CTTM16-D 16mm 1″ 2-7/8″ 1″ 7-1/2″ 7.35
– – 1CTTM16-CS 16mm 1″ 2-5/8″ 1″ 7-1/2″ 7.35
Engineered In America Every Hayn fitting is designed and manufactured at our facility in Rocky Hill, Connecticut — the same American workmanship that has set the standard for stainless steel rigging hardware since 1950.
Cold-Worked Production Hayn fittings are cold-worked, not cast. That distinction matters: the cold-working process refines grain structure, increases fatigue resistance, and produces a fundamentally stronger component — one built to perform when the load comes on it.
Precision Manufacturing Our Rocky Hill production floor runs CNC vertical mills, CNC lathes, large-capacity mill-turn centers, and waterjet cutting systems — all configured to produce hardware that meets exact specifications, every time.
75+ Years of Excellence Hayn has been engineering and manufacturing marine and architectural rigging hardware since 1950. That track record isn't just history, it's the design knowledge, failure data, and continuous improvement that goes into every product we make. 
  • Type 316 stainless steel construction for superior saltwater corrosion resistance
  • Manufactured in Rocky Hill, Connecticut to Hayn's proprietary tolerances
  • Precision-machined using advanced CNC manufacturing equipment



  • Engineered for seamless integration in marine and architectural rigging systems

  • Short lead times on both standard and custom components

  • Backed by 75 years of marine and architectural hardware expertise

Hayn Product Header (2)

Let's Build Something Together

 Hayn has been engineering precision rigging hardware since 1950. So whatever your project demands, you're building with hardware that's been proven at sea and on structure for generations. 
Request Technical Specifications