Skip to content
Close
SEARCH
CONTACT
PHONE HOTLINE: 800-346-4296 E-MAIL: sales@hayn.com
Contact Us
PHONE HOTLINE: 800-346-4296 E-MAIL: sales@hayn.com
Contact Us
Hayn Product Header (2240 x 660 px)

Hi-MOD Compression Splice Links

Hayn Hi-MOD Compression Splice Links are Type 316 stainless steel mid-line connectors that join two Hi-MOD compression terminals back to back, creating a field-assembled, inspectable connection point anywhere along a wire rope run. 

Strong Where It Matters

Hi Mod Compression Splice Links

Splice links are the practical solution when a wire run needs to be joined, extended, or connected to another terminated wire without swaging equipment on hand. Because both ends accept standard Hi-MOD terminals, the connection benefits from the same crown ring strand-spacing and shallow-cone geometry that makes Hi-MOD the most reliable swageless terminal available. Available for 1x19 and 7-strand imperial wire from 1/8" through 5/8", and metric wire from 3mm through 16mm in 1x19, 7-strand, Compact Strand, and Dyform configurations. 
Request specifications
compression splice links

Imperial Wire Sizes

Part # Wire ⌀ H-Hardware Factor Weight lbs.
CTL18 1/8″ 1″ 0.06
CTL532 5/32″ 1″ 0.10
CTL316 3/16″ 1-5/16″ 0.19
CTL732 7/32″ 1-5/16″ 0.19
CTL14 1/4″ 1-3/8″ 0.32
CTL932 9/32″ 1-5/8″ 0.50
CTL516 5/16″ 2-1/8″ 0.86
CTL38 3/8″ 2-1/2″ 1.39
CTL716 7/16″ 2-1/2″ 1.35
CTL12 1/2″ 2-7/8″ 2.65
CTL916 9/16″ 3-1/4″ 4.08
CTL58 5/8″ 3-3/4″ 5.70

Metric Wire Sizes

Part # Compact Strand / Dyform Wire ⌀ H-Hardware Factor Weight lbs.
CTLM03 CTLM03-D 3mm 1″ 0.06
CTLM04 CTLM04-D 4mm 1″ 0.10
CTLM05 CTLM05-D 5mm 1-5/16″ 0.19
CTLM06 CTLM06-D 6mm 1-3/8″ 0.32
CTLM07 CTLM07-D 7mm 1-5/8″ 0.50
CTLM08 CTLM08-D 8mm 2-1/8″ 0.86
CTLM10 CTLM10-D 10mm 2-1/2″ 1.39
CTLM12 CTLM12-CS 12mm 2-7/8″ 2.65
CTLM14 – 14mm 3-1/4″ 4.08
– CTLM14-CS19 14mm (1X19) 3-1/4″ 4.08
– CTLM14-CS36 14mm (1X36) 3-1/4″ 4.08
CTLM16 – 16mm 3-3/4″ 5.70
– CTLM16-CS 16mm (1X36) 3-3/4″ 5.70

Note: Imperial wire sizes are available in 7-strand configurations by adding -7 to the Part #. Metric wire sizes are also available in Compact Strand, Dyform, and 7-strand configurations by adding -CS, -D, or -7 to the Part #, respectively.

Engineered In America Every Hayn fitting is designed and manufactured at our facility in Rocky Hill, Connecticut — the same American workmanship that has set the standard for stainless steel rigging hardware since 1950.
Cold-Worked Production Hayn fittings are cold-worked, not cast. That distinction matters: the cold-working process refines grain structure, increases fatigue resistance, and produces a fundamentally stronger component — one built to perform when the load comes on it.
Precision Manufacturing Our Rocky Hill production floor runs CNC vertical mills, CNC lathes, large-capacity mill-turn centers, and waterjet cutting systems — all configured to produce hardware that meets exact specifications, every time.
75+ Years of Excellence Hayn has been engineering and manufacturing marine and architectural rigging hardware since 1950. That track record isn't just history, it's the design knowledge, failure data, and continuous improvement that goes into every product we make. 
  • Type 316 stainless steel construction for superior saltwater corrosion resistance
  • Manufactured in Rocky Hill, Connecticut to Hayn's proprietary tolerances
  • Precision-machined using advanced CNC manufacturing equipment



  • Engineered for seamless integration in marine and architectural rigging systems

  • Short lead times on both standard and custom components

  • Backed by 75 years of marine and architectural hardware expertise

Hayn Product Header (2)

Let's Build Something Together

 Hayn has been engineering precision rigging hardware since 1950. So whatever your project demands, you're building with hardware that's been proven at sea and on structure for generations. 
Request Technical Specifications