Skip to content
Close
SEARCH
CONTACT
PHONE HOTLINE: 800-346-4296 E-MAIL: sales@hayn.com
Contact Us
PHONE HOTLINE: 800-346-4296 E-MAIL: sales@hayn.com
Contact Us
Hayn Product Header (2240 x 660 px)

Cone Configuration Chart

 The Hi-MOD Compression Fittings Cone Configuration Chart is the essential reference for selecting the correct cone and crown ring part numbers for any Hi-MOD terminal assembly, organized by wire diameter, wire construction type, and body code. 
Strong Where It Matters

Hi-MOD Compression Fittings Cone Configuration Chart

Correct cone selection is critical to a properly assembled Hi-MOD terminal — the cone geometry, length, and crown ring must match both the wire diameter and construction type (1x19, 7-strand, Compact Strand, or Dyform) to ensure even strand distribution and full load transfer at the fitting. The chart covers standard 1x19 wire from 1/8" through 1" and 3mm through 26mm, 7-strand configurations from 1/8" through 9/16", and Compact Strand and Dyform variants from 5mm through 19mm. When in doubt about the correct configuration for a specific wire type or diameter, contact your Hayn sales associate before assembling. 
Request specifications
compression fittings cone configuration chart

Hi-MOD Compression Fittings Cone Configuration Chart

Cone configuration chart for Hi-MOD compression fittings. Use this chart to match wire diameter and wire type with the correct body code, cone part number, cone length, identification rings, and crown ring part number.

Note: There are instances where 12mm Compact Strand does not allow for adequate thread engagement. In this case, the cone is to be substituted with part # CTC12.

1×19 Wire
Wire Ø Wire Type Body Code Cone P/N Cone Color Cone Length Ident. Rings Crown Ring P/N
1/8″ or 3mm 1×19 03 CTC18   0.551 0 CTCR18
5/32″ or 4mm 1×19 04 CTC532   0.787 0 CTCR532
3/16″ or 5mm 1×19 05 CTC316   0.933 0 CTCR316
7/32″ 1×19 05 CTC732   0.874 0 CTCR732
6mm 1×19 06 CTCM6   1.106 0 CTCR14
1/4″ 1×19 06 CTC14   1.106 0 CTCR14
9/32″ or 7mm 1×19 07 CTC932   1.283 0 CTCR932
5/16″ or 8mm 1×19 08 CTC516   1.571 0 CTCR516
3/8″ 1×19 10 CTC38   1.886 0 CTCR38
10mm 1×19 10 CTCM10   1.874 0 CTCR38
12mm 1×19 12 CTCM12   2.209 0 CTCR12
7/16″ 1×19 10 CTC716   1.874 0 CTCR38
1/2″ 1×19 12 CTC12   2.209 0 CTCR12
9/16″ or 14mm 1×19 14 CTC916   2.55 0 CTCR916
5/8″ or 16mm 1×19 16 CTC58   3.15 0 CTCR58
3/4″ or 19mm 1×19 19 CTC34   3.413 0 CTCR34
7/8″ or 22mm 1×19 22 CTC78   3.913 0 CTCR78
1″ or 26mm 1×19 26 CTC1   4.606 0 CTCR1

CS = KOS Compact Strand / D = Bridon Dyform

Compact Strand / Dyform Wire
Wire Ø Wire Type Body Code Cone P/N Cone Color Cone Length Ident. Rings Crown Ring P/N
3mm 1×7 03 CTC18-7   0.551 0 CTCR18
4mm 1×7 04 CTC532-7   0.787 0 CTCR532
5mm 1×19 05 CTC316   0.933 0 CTCRM5-D
6mm 1×19 06 CTCM6   1.106 0 CTCRM6-D
7mm 1×19 07 CTC932   1.283 0 CTCRM7-D
8mm 1×19 08 CTC516   1.571 0 CTCRM8-D
10mm 1×19 10 CTCM10   1.874 0 CTCRM10-D
12mm* 1×19 12 CTCM12   2.209 0 CTCRM12-D
12mm 1×19 12 CTCM12-CS   2.209 0 CTCRM12-D
14mm D – 1×25 14 CTCM14-D   2.543 2 CTCRM14-D
14mm CS – 1×36 14 CTCM14-CS No Color 2.235 2 CTCRM14-CS
16mm D – 1×25 16 CTCM16-D   3.138 2 CTCRM16-D
16mm CS – 1×36 16 CTCM16-CS No Color 3.09 2 CTCRM16-CS
19mm D – 1×31 19 CTCM19-D   3.413 2 CTCRM19-D
19mm CS – 1×31 19 CTCM19-CS   3.355 2 CTCRM19-CS
19mm CS – 1×36 19 CTCM19-CS1x36 No Color 2.63 0 CTCRM19-CS1x36

7 Strand includes 1×7, 7×7, and 7×19 wire.

7 Strand Wire
Wire Ø Wire Type Body Code Cone P/N Cone Color Cone Length Ident. Rings Crown Ring P/N
1/8″ or 3mm 7 Strand 03 CTC18-7   0.512 1 CTCR18
5/32″ or 4mm 7 Strand 04 CTC532-7   0.709 1 CTCR532
3/16″ or 5mm 7 Strand 05 CTC316-7   0.886 1 CTCR316
7/32″ 7 Strand 05 CTC732-7   0.886 1 CTCR732
6mm 7 Strand 06 CTCM6-7   1.063 1 CTCR14-7
1/4″ 7 Strand 06 CTC14-7   1.063 1 CTCR14-7
9/32″ or 7mm 7 Strand 07 CTC932-7   1.181 1 CTCR932-7
5/16″ or 8mm 7 Strand 08 CTC516-7   1.461 1 CTCR516-7
3/8″ 7 Strand 10 CTC38-7   1.764 1 CTCR38-7
10mm 7 Strand 10 CTCM10-7   1.764 1 CTCR38-7
7/16″ 7 Strand 10 CTC716-7   1.768 1 CTCR38-7
1/2″ or 12mm 7 Strand 12 CTC12-7   2.181 1 CTCR12-7
9/16″ or 14mm 7 Strand 14 CTC916-7   2.504 1 CTCR916-7
Engineered In America Every Hayn fitting is designed and manufactured at our facility in Rocky Hill, Connecticut — the same American workmanship that has set the standard for stainless steel rigging hardware since 1950.
Cold-Worked Production Hayn fittings are cold-worked, not cast. That distinction matters: the cold-working process refines grain structure, increases fatigue resistance, and produces a fundamentally stronger component — one built to perform when the load comes on it.
Precision Manufacturing Our Rocky Hill production floor runs CNC vertical mills, CNC lathes, large-capacity mill-turn centers, and waterjet cutting systems — all configured to produce hardware that meets exact specifications, every time.
75+ Years of Excellence Hayn has been engineering and manufacturing marine and architectural rigging hardware since 1950. That track record isn't just history, it's the design knowledge, failure data, and continuous improvement that goes into every product we make. 
  • Type 316 stainless steel construction for superior saltwater corrosion resistance
  • Manufactured in Rocky Hill, Connecticut to Hayn's proprietary tolerances
  • Precision-machined using advanced CNC manufacturing equipment



  • Engineered for seamless integration in marine and architectural rigging systems

  • Short lead times on both standard and custom components

  • Backed by 75 years of marine and architectural hardware expertise

Hayn Product Header (2)

Let's Build Something Together

 Hayn has been engineering precision rigging hardware since 1950. So whatever your project demands, you're building with hardware that's been proven at sea and on structure for generations. 
Request Technical Specifications