Skip to content
Close
SEARCH
CONTACT
PHONE HOTLINE: 800-346-4296 E-MAIL: sales@hayn.com
Contact Us
PHONE HOTLINE: 800-346-4296 E-MAIL: sales@hayn.com
Contact Us
Blog Banner for Website Content (7)

Hi-MOD Compression Eyes

The Hi-MOD Compression Eye is a swageless terminal that installs without heat or hydraulic equipment, delivering a secure, inspectable wire connection in the field. 
Engineered In America Every Hayn fitting is designed and manufactured at our facility in Rocky Hill, Connecticut — the same American workmanship that has set the standard for stainless steel rigging hardware since 1950.
Cold-Worked Production Hayn fittings are cold-worked, not cast. That distinction matters: the cold-working process refines grain structure, increases fatigue resistance, and produces a fundamentally stronger component — one built to perform when the load comes on it.
Precision Manufacturing Our Rocky Hill production floor runs CNC vertical mills, CNC lathes, large-capacity mill-turn centers, and waterjet cutting systems — all configured to produce hardware that meets exact specifications, every time.
75+ Years of Excellence Hayn has been engineering and manufacturing marine and architectural rigging hardware since 1950. That track record isn't just history, it's the design knowledge, failure data, and continuous improvement that goes into every product we make. 

Hi-MOD Compression Eyes — Imperial Wire Sizes

316 Stainless Steel

Part # (1×19) Part # (7×7 or 7×19) Wire Ø D - Pin Ø H - Hardware Factor HT - Head Thickness Weight lbs.
14CTE18 14CTE18-7 1/8″ 1/4″ 7/8″ 3/16″ 0.04
516CTE532 516CTE532-7 5/32″ 5/16″ 1-1/16″ 1/4″ 0.08
38CTE316 38CTE316-7 3/16″ 3/8″ 1-5/16″ 5/16″ 0.14
38CTE732 38CTE732-7 7/32″ 3/8″ 1-1/2″ 3/8″ 0.14
716CTE732 716CTE732-7 7/32″ 7/16″ 1-1/2″ 3/8″ 0.19
38CTE14 38CTE14-7 1/4″ 3/8″ 1-3/8″ 3/8″ 0.21
716CTE14 716CTE14-7 1/4″ 7/16″ 1-9/16″ 3/8″ 0.20
12CTE14 12CTE14-7 1/4″ 1/2″ 1-5/8″ 7/16″ 0.28
12CTE932 12CTE932-7 9/32″ 1/2″ 1-3/4″ 7/16″ 0.37
12CTE516 12CTE516-7 5/16″ 1/2″ 1-15/16″ 1/2″ 0.52
916CTE516 916CTE516-7 5/16″ 9/16″ 2″ 1/2″ 0.60
58CTE516 58CTE516-7 5/16″ 5/8″ 2-1/4″ 9/16″ 0.69
58CTE38 58CTE38-7 3/8″ 5/8″ 2-5/16″ 9/16″ 0.96
34CTE716 34CTE716-7 7/16″ 3/4″ 2-5/8″ 11/16″ 1.23
34CTE12 34CTE12-7 1/2″ 3/4″ 3-1/8″ 11/16″ 1.96
78CTE12 78CTE12-7 1/2″ 7/8″ 3-1/8″ 7/8″ 2.13
78CTE916 78CTE916-7 9/16″ 7/8″ 3-3/8″ 7/8″ 2.87
1CTE916 1CTE916-7 9/16″ 1″ 3 3/4″ 15/16″ 3.36
1CTE58 1CTE58-7 5/8″ 1″ 3-7/8″ 15/16″ 4.02
118CTE34 118CTE34-7 3/4″ 1-1/8″ 3-5/8″ 1-1/16″ 4.66
114CTE78 114CTE78-7 7/8″ 1-1/4″ 4-1/4″ 1-1/4″ 6.77
138CTE1 138CTE1-7 1″ 1-3/8″ 5-11/16″ 1-5/16″ 12.45

Hi-MOD Compression Eyes — Metric Wire Sizes

316 Stainless Steel. Note: “-D” indicates Compact Strand / Dyform.

Part # (1×19) Part # (7×7 or 7×19) Cmpt Strnd / Dyform Wire Ø D - Pin Ø H - Hardware Factor HT - Head Thickness Weight lbs.
14CTEM03 14CTEM03-7 – 3mm 1/4″ 7/8″ 3/16″ 0.04
516CTEM04 516CTEM04-7 – 4mm 5/16″ 1-1/16″ 1/4″ 0.08
38CTEM05 38CTEM05-7 38CTEM05-D 5mm 3/8″ 1-5/16″ 5/16″ 0.14
38CTEM06 38CTEM06-7 38CTEM06-D 6mm 3/8″ 1-3/8″ 3/8″ 0.21
716CTEM06 716CTEM06-7 716CTEM06-D 6mm 7/16″ 1-9/16″ 3/8″ 0.20
12CTEM06 12CTEM06-7 12CTEM06-D 6mm 1/2″ 1-5/8″ 7/16″ 0.28
12CTEM07 12CTEM07-7 12CTEM07-D 7mm 1/2″ 1-3/4″ 7/16″ 0.37
12CTEM08 12CTEM08-7 12CTEM08-D 8mm 1/2″ 1-5/16″ 1/2″ 0.52
916CTEM08 916CTEM08-7 916CTEM08-D 8mm 9/16″ 2″ 1/2″ 0.60
58CTEM08 58CTEM08-7 58CTEM08-D 8mm 5/8″ 2-1/4″ 9/16″ 0.69
58CTEM10 58CTEM10-7 58CTEM10-D 10mm 5/8″ 2-5/16″ 9/16″ 0.96
34CTEM12 34CTEM12-7 34CTEM12-D 12mm 3/4″ 3-1/8″ 11/16″ 1.96
– – 34CTEM12-CS 12mm 3/4″ 3-1/8″ 11/16″ 1.96
78CTEM14 – 78CTEM14-D 14mm 7/8″ 3-3/8″ 7/8″ 2.87
– – 78CTEM14-CS 14mm 7/8″ 3-3/8″ 7/8″ 2.87
1CTEM14 – 1CTEM14-D 14mm 1″ 3-7/16″ 7/8″ 3.75
– – 1CTEM-CS 14mm 1″ 3-7/16″ 7/8″ 3.75
1CTEM16 – 1CTEM16-D 16mm 1″ 3-7/8″ 15/16″ 4.02
– – 1CTEM16-CS 16mm 1″ 3-7/8″ 15/16″ 4.02
118CTEM19 – 118CTEM19-D 19mm 1-1/8″ 3-5/8″ 1-1/16″ 4.66
– – 118CTEM19-CS 19mm 1-1/8″ 3-5/8″ 1-1/16″ 4.66
114CTEM22 – 114CTEM22-D 22mm 1-1/4″ 4-1/4″ 1-1/4″ 6.77
– – 114CTEM22-CS 22mm 1-1/4″ 4-1/4″ 1-1/4″ 6.77
138CTEM26 – 138CTEM26-D 26mm 1-3/8″ 5-11/16″ 1-5/16″ 12.45
– – 138CTEM26-CS 26mm 1-3/8″ 5-11/16″ 1-5/16″ 12.45
Strong Where It Matters

Hi-MOD Compression Eye

Produced by Petersen Stainless in the UK and distributed exclusively by Hayn in the USA, the Hi-MOD features a unique crown ring that spaces wire strands evenly around the fitting so each one carries an equal share of the load. The longer cone with a shallower angle, combined with no need to bend strands around it, makes installation more reliable and less error-prone than traditional swageless designs. Both the cone and crown ring are fully reusable, so inspection and reassembly require no replacement parts.
Request specifications
58CTE38

Superior Material Quality

Manufactured from premium 316 marine-grade stainless steel, Hayn products deliver exceptional corrosion resistance and structural integrity in demanding environments. Precision-machined using advanced automation technology, each component meets rigorous quality standards. Engineered for marine, architectural, and industrial applications.
View specifications
hayn product 1
  • Type 316 stainless steel construction for superior saltwater corrosion resistance
  • Manufactured in Rocky Hill, Connecticut to Hayn's proprietary tolerances
  • Precision-machined using advanced CNC manufacturing equipment



  • Engineered for seamless integration in marine and architectural rigging systems

  • Short lead times on both standard and custom components

  • Backed by 75 years of marine and architectural hardware expertise

Blog Banner for Website Content (2)

Let's Build Something Together

 Hayn has been engineering precision rigging hardware since 1950. So whatever your project demands, you're building with hardware that's been proven at sea and on structure for generations. 
Request Technical Specifications