HAYN LINES STAINLESS STEEL CABLE SYSTEMS by Hayn Enterprises

Threaded Stud System

The most cost effective cable attachment and tensioning solution offers a very "clean" look. This system normally uses a Flat Washer and Hex Nut for tensioning against the end verticals/posts in the run. A Cap (Acorn) Nut is installed on the protruding threads to finish off the attachment and lock the tensioning nut in position.

 

 

Lifeline Studs

Machine Swage
Thread Wire Size Thread Length Part #
10-32 UNF RH 1/8" 3/8" 10TJLL18S
10-32 UNF RH 1/8" 1-3/4" 10LL18RH
1/4-28 UNF RH 1/8" 7/16" 14TJLL18S
1/4-28 UNF RH 1/8" 1-1/2" 14LLP18RH
1/4-28 UNF RH 1/8" 2-1/4" 14LL18RH
1/4-28 UNF RH 1/8" 3-1/4" 14ASLL18RH
1/4-28 UNF RH 5/32" 7/16" 14TJLL532S
1/4-28 UNF RH 5/32" 1-1/2" 14LLP532RH
1/4-28 UNF RH 5/32" 2-1/4" 14LL532RH
1/4-28 UNF RH 5/32" 3-1/4" 14ASLL532RH
1/4-28 UNF RH 3/16" 7/16" 14TJLL316S
1/4-28 UNF RH 3/16" 1-1/2" 14LLP316RH
1/4-28 UNF RH 3/16" 2-1/4" 14LL316RH
1/4-28 UNF RH 3/16" 3-1/4" 14ASLL316RH
5/16-24 UNF RH 3/16" 7/16" 516LLE316RH
5/16-24 UNF RH 3/16" 1-1/2" 516LLP316RH
5/16-24 UNF RH 3/16" 2-3/8" 516LL316RH
5/16-24 UNF RH 1/4" 7/16" 516TJLL14S
5/16-24 UNF RH 1/4" 1-1/2" 516LLP14RH
5/16-24 UNF RH 1/4" 2-3/8" 516LL14RH
3/8-24 UNF RH 1/4" 7/16" 38TJLL14S
3/8-24 UNF RH 1/4" 1-1/2" 38LLP14RH
3/8-24 UNF RH 1/4" 2-3/4" 38LL14RH
1/2-20 UNF RH 5/16" 3.0" 12LL516RH
1/2-20 UNF RH 3/8" 3.0" 12LL38RH
Machine Swage - with Wrench Flat
Thread Wire Size Thread Length Part #
1/4-28 UNF LH 3/16" 2-1/4" 14LL316FLH
1/4-28 UNF RH 3/16" 2-1/4" 14LL316FRH
5/16-24 UNF LH 3/16" 2-3/8" 516LL316FLH
5/16-24 UNF RH 3/16" 2-3/8" 516LL316FRH
5/16-24 UNF LH 1/4" 2-3/8" 516LL14FLH
5/16-24 UNF RH 1/4" 2-3/8" 516LL14FRH
3/8-24 UNF LH 1/4" 2-3/4" 38LL14FLH
3/8-24 UNF RH 1/4" 2-3/4" 38LL14FRH
Handy Crimp
Thread Wire Size Thread Length Part #
1/4-28 UNF RH 1/8" 7/16" 14CLLE18RH
1/4-28 UNF RH 1/8" 1-1/2" 14CLLP18RH
1/4-28 UNF RH 1/8" 2-1/4" 14CLL18RH
1/4-28 UNF RH 3/16" 7/16" 14TJCLL316S
1/4-28 UNF RH 3/16" 1-1/2" 14CLLP316RH
1/4-28 UNF RH 3/16" 2-1/4" 14CLL316RH
5/16-24 UNF RH 3/16" 7/16" 516CLLE316RH
5/16-24 UNF RH 3/16" 1-1/2" 516CLLP316RH
5/16-24 UNF RH 3/16" 2-3/8" 516CLL316RH
Hayn Grip Swageless Fitting
Thread Wire Size Thread Length Part #
1/4-28 UNF LH 1/8" 2-1/4" 14HG18LH
1/4-28 UNF RH 1/8" 2-1/4" 14HG18RH
1/4-28 UNF LH 3/16" 2-1/4" 14HG316LH
1/4-28 UNF RH 3/16" 2-1/4" 14HG316RH