HAYN LINES STAINLESS STEEL CABLE SYSTEMS by Hayn Enterprises

Termination Stud System

This cost effective cable tensioning system utilizes high quality closed turnbuckle assemblies and surface mount Termination Studs. Installation is easy by simply drilling holes in your verticals for the cable to pass through. Tensioning is accomplished by the Termination Stud cap or top pulling against the end verticals/posts in the run. This system supports any type or style of post with available wire sizes ranging from 1/8" to 3/8". Standard Termination Stud end fittings listed are for 2" - 4" - 6" thick post configurations; however, Termination Studs are available for up to 12" thick post configurations. All hardware is made from high quality 316 grade stainless steel for superior corrosion resistance.

In addition to new projects, this system proves to be a choice for retrofitting existing rails to meet current codes.

Termination Stud Turnbuckle - Stainless Tubular Bodies

Termination Stud Turnbuckle
Machine Swage
Thread
(b)
Wire Size
(c)
Body L
(d)
Open L
(e)
Closed L
(e)
Cap Size
(a)
Rod Length
(l)
Part
#
1/4-28 UNF 1/8" 4-1/4" 9-1/4" 6-1/4" 9/16" 1-1/4" 14TTLL18TS1
1/4-28 UNF 1/8" 4-1/4" 10-1/4" 7-1/8" 9/16" 2-1/4" 14TTLL18TS
1/4-28 UNF 1/8" 4-1/4" 12-1/4" 9-1/8" 9/16" 4-1/4" 14TTLL18TS4
1/4-28 UNF 1/8" 4-1/4" 14-1/4" 11-1/8" 9/16" 6-1/4" 14TTLL18TS6
1/4-28 UNF 5/32" 4-1/4" 9-1/2" 6-1/2" 9/16" 1-1/4" 14TTLL532TS1
1/4-28 UNF 5/32" 4-1/4" 10-1/2" 7-1/2" 9/16" 2-1/4" 14TTLL532TS
1/4-28 UNF 3/16" 4-1/4" 9-1/2" 6-1/2" 9/16" 1-1/4" 14TTLL316TS1
1/4-28 UNF 3/16" 4-1/4" 10-1/2" 7-1/2" 9/16" 2-1/4" 14TTLL316TS
1/4-28 UNF 3/16" 4-1/4" 12-1/2" 9-1/2" 9/16" 4-1/4" 14TTLL316TS4
1/4-28 UNF 3/16" 4-1/4" 14-1/2" 11-1/2" 9/16" 6-1/4" 14TTLL316TS6
5/16-24 UNF 3/16" 4-3/4" 10-3/4" 8.0" 9/16" 2-1/4" 516TTLL316TS
5/16-24 UNF 1/4" 4-3/4" 10-3/4" 8-1/8" 9/16" 2-1/4" 516TTLL14TS
1/2-20 UNF 5/16" 6-1/2" 15-1/2" 12-1/2" cap nut 2-1/4" 12TTLL516TS
1/2-20 UNF 3/8" 6-1/2" 15-1/2" 12-1/2" cap nut 2-1/4" 12TTLL38TS
Handy Crimp
1/4-28 UNF 1/8" 4-1/4" 9-1/4" 6-1/4" 9/16" 1-1/4" 14TTCLL18TS1
1/4-28 UNF 1/8" 4-1/4" 10-1/4" 7-1/8" 9/16" 2-1/4" 14TTCLL18TS
1/4-28 UNF 1/8" 4-1/4" 12-1/4" 9-1/8" 9/16" 4-1/4" 14TTCLL18TS4
1/4-28 UNF 1/8" 4-1/4" 14-1/4" 11-1/8" 9/16" 6-1/4" 14TTCLL18TS6
1/4-28 UNF 3/16" 4-1/4" 9-1/2" 6-1/2" 9/16" 1-1/4" 14TTCLL316TS1
1/4-28 UNF 3/16" 4-1/4" 10-1/2" 7-1/2" 9/16" 2-1/4" 14TTCLL316TS
1/4-28 UNF 3/16" 4-1/4" 12-1/2" 9-1/2" 9/16" 4-1/4" 14TTCLL316TS4
1/4-28 UNF 3/16" 4-1/4" 14-1/2" 11-1/2" 9/16" 6-1/4" 14TTCLL316TS6
Hayn Grip Swageless Fitting
1/4-28 UNF 1/8" 4-1/4" 9-1/4" 7.0" 9/16" 1-1/4" 14TTHG18TS1
1/4-28 UNF 1/8" 4-1/4" 10-1/4" 8.0" 9/16" 2-1/4" 14TTHG18TS
1/4-28 UNF 1/8" 4-1/4" 12-1/4" 10.0" 9/16" 2-1/4" 14TTHG18TS4
1/4-28 UNF 1/8" 4-1/4" 14-1/4" 12.0" 9/16" 2-1/4" 14TTHG18TS6
1/4-28 UNF 3/16" 4-1/4" 9-1/4" 7.0" 9/16" 1-1/4" 14TTHG316TS1
1/4-28 UNF 3/16" 4-1/4" 10-1/4" 8.0" 9/16" 2-1/4" 14TTHG316TS
1/4-28 UNF 3/16" 4-1/4" 12-1/4" 10.0" 9/16" 2-1/4" 14TTHG316TS4
1/4-28 UNF 3/16" 4-1/4" 14-1/4" 12.0" 9/16" 2-1/4" 14TTHG316TS6

Termination Stud

Termination Stud
Machine Swage
Wire Size
(c)
Cap Size
(a)
Cap Thickness
(t)
Body O.D.*
(d)
Body Length*
(l)
Part
#
1/8" 1/2" 0.205 0.250 1.500 TSLL18
5/32" 9/16" 0.205 0.297 1.750 TSLL532
3/16" 9/16" 0.205 0.359 1.750 TSLL316
1/4" 9/16" 0.220 0.427 2.300 TSLL14
5/16" 15/16" 0.437 0.635 3.312 TSLL516
3/8" 15/16" 0.437 0.703 3.312 TSLL38
Handy Crimp
1/8" 1/2" 0.205 0.210 2.000 TSCLL18
3/16" 9/16" 0.205 0.292 2.187 TSCLL316
Hayn Grip Swageless Fitting
1/8" 9/16" 1/8" 3/8" 1-1/4" TSHG18
3/16" 5/8" 1/8" 7/16" 1-1/4" TSHG316