HAYN LINES STAINLESS STEEL CABLE SYSTEMS by Hayn Enterprises

Deck Toggle System

Surface Mount System — This cost effective cable tensioning system utilizes "Deck" toggles which provide a face mount solution while allowing for angled takeoff. The Deck Toggle fittings are attached utilizing two screws through the Deck Toggle base. The mounting surfaces include wood posts or blocking (requires minimum 3" wood blocking) on either side of a common post by through bolting, or drilling and tapping a metallic post. The articulation range of the Deck Toggle end fittings is greater than 180 degrees. All hardware is made from high quality 316 grade stainless steel for superior corrosion resistance.

The strength of the cable assembly is limited to the screw strength and attaching base material.

Deck Toggle Turnbuckle - Stainless Tubular Bodies

Deck Toggle Turnbuckle
Machine Swage
Thread
(b)
Wire Size
(c)
Body L
(d)
Open L
(e)
Closed L
(e)
Screw Size
(l)
Hole Spacing
(k)
Part
#
1/4-28 UNF 1/8" 4-1/4" 9-1/8" 6-3/8" 1/4" 1-1/2" 14TTLL18DT
1/4-28 UNF 5/32" 4-1/4" 9-1/4" 6-1/2" 1/4" 1-1/2" 14TTLL532DT
1/4-28 UNF 3/16" 4-1/4" 9-1/4" 6-1/2" 1/4" 1-1/2" 14TTLL316DT
5/16-24 UNF 3/16" 4-3/4" 10-1/8" 7-1/8" 5/16" 1-3/4" 516TTLL316DT
5/16-24 UNF 1/4" 4-3/4" 10-1/4" 7-1/8" 5/16" 1-3/4" 516TTLL14DT
3/8-24 UNF 1/4" 5-1/4" 11-1/8" 7-3/4" 3/8" 2.0" 38TTLL14DT
Handy Crimp
1/4-28 UNF 1/8" 4-1/4" 9-3/8" 6-5/8" 1/4" 1-1/2" 14TTCLL18DT
1/4-28 UNF 3/16" 4-1/4" 9-1/4" 6-1/2" 1/4" 1-1/2" 14TTCLL316DT
5/16-24 UNF 3/16" 4-3/4" 10-1/8" 7-1/8" 5/16" 1-3/4" 516TTCLL316DT
Hayn Grip Swageless Fitting
1/4-28 UNF 1/8" 4-1/4" 8-3/4" 6-1/2" 1/4" 1-1/2" 14TTHG18DT
1/4-28 UNF 3/16" 4-1/4" 8-3/4" 6-1/2" 1/4" 1-1/2" 14TTHG316DT

Deck Toggle Jaw

Deck Toggle Jaw
Machine Swage
Wire Size
(c)
Length
(e)
Screw Size
(l)
Hole Spacing
(k)
Part
#
1/8" 2-1/8" 1/4" 1-1/2" 14TJLL18DT
5/32" 1-7/8" 1/4" 1-1/2" 14TJLL532DT
3/16" 1-5/8" 1/4" 1-1/2" 14TJLL316DT
3/16" 2-1/8" 5/16" 1-3/4" 516TJLL316DT
1/4" 2.0" 5/16" 1-3/4" 516TJLL14DT
1/4" 2-1/8" 3/8" 2.0" 38TJLL14DT
Handy Crimp
1/8" 2-1/8" 1/4" 1-1/2" 14TJCLL18DT
3/16" 1-13/16" 1/4" 1-1/2" 14TJCLL316DT
Hayn Grip Swageless Fitting
1/8" 1-3/4" 1/4" 1-1/2" 14TJHG18DT
3/16" 1-3/4" 1/4" 1-1/2" 14TJHG316DT