HAYN LINES STAINLESS STEEL CABLE SYSTEMS by Hayn Enterprises

Countersunk Termination Stud System

The Countersunk Termination Stud system demonstrates similar features as our Termination Stud system, except the end fittings are sunk into the end verticals in the run for a flush look. This system supports flat bar or tube style posts in wire sizes ranging from 1/8" to 3/16". Standard Termination Stud end fittings listed are for 2" - 4" - 6" thick post configurations; however, Termination Studs are available for up to 12" thick post configurations. Installation is simple, by using a standard 82° countersink on your end verticals/posts the fitting will insert flush with the face. All hardware is made from high quality 316 grade stainless steel for superior corrosion resistance.

Countersunk Termination Stud Turnbuckle - Stainless Tubular Bodies

Countersunk Termination Stud Turnbuckle
Machine Swage
Thread (b) Wire Size (c) Body L (d) Open L (e) Closed L (e) Cap Size (a) Part #
1/4-28 UNF 1/8" 4-1/4" 10-5/8" 8-1/4" 9/16" 14TTLL18CTS
1/4-28 UNF 1/8" 4-1/4" 12-5/8" 10-1/4" 9/16" 14TTLL18CTS4
1/4-28 UNF 1/8" 4-1/4" 14-5/8" 12-1/4" 9/16" 14TTLL18CTS6
1/4-28 UNF 5/32" 4-1/4" 11-1/8" 8-3/8" 9/16" 14TTLL532CTS
1/4-28 UNF 3/16" 4-1/4" 11-1/8" 8-3/8" 9/16" 14TTLL316CTS
1/4-28 UNF 3/16" 4-1/4" 13-1/8" 10-3/8" 9/16" 14TTLL316CTS4
1/4-28 UNF 3/16" 4-1/4" 15-1/8" 12-3/8" 9/16" 14TTLL316CTS6
Handy Crimp
1/4-28 UNF 1/8" 4-1/4" 11-1/4" 8-3/8" 9/16" 14TTCLL18CTS
1/4-28 UNF 1/8" 4-1/4" 13-1/4" 10-3/8" 9/16" 14TTCLL18CTS4
1/4-28 UNF 1/8" 4-1/4" 15-1/4" 12-3/8" 9/16" 14TTCLL18CTS6
1/4-28 UNF 3/16" 4-1/4" 11.0" 8-1/4" 9/16" 14TTCLL316CTS
1/4-28 UNF 3/16" 4-1/4" 13.0" 10-1/4" 9/16" 14TTCLL316CTS4
1/4-28 UNF 3/16" 4-1/4" 15.0" 12-1/4" 9/16" 14TTCLL316CTS6

Countersunk Termination Stud

Countersunk Termination Stud
Machine Swage
Wire Size (c) Cap Size (a) Cap Angle Body O.D.* (d) Body Length* (l) Part #
1/8" 1/2" 82º 0.250 1.500 CTSLL18
5/32" 9/16" 82º 0.297 1.750 CTSLL532
3/16" 9/16" 82º 0.359 1.750 CTSLL316
Handy Crimp
1/8" 1/2" 82º 0.210 2.625 CTSCLL18
3/16" 9/16" 82º 0.292 2.750 CTSCLL316

Countersunk Termination Stud Thread on Cap

Countersunk Termination Stud Thread on Cap
           
Thread (b) Body Length (l) Body O.D. (d) Countersink Angle Cap Size (a) Part #
1/4-28 UNF 9/16" 0.359 82º 9/16" CTST14